Car Engine Intake Pipe Valve Cleaning Machine Walnut Powder Carbon Wash HTS558

Description

*Welcome to My Car Store Have a Nice Day*
Car Engine Intake Pipe Valve Cleaning Machine Walnut Powder Carbon Wash HTS558
HTS558 walnut powder engine Intake pipe valve clean machine is a advanced equipment for clean engine intake carbon deposition. Keeping engine in healthy status, make sure engine provides high quality power constantly.
HTS558 Car Engine Carbon Deposition Cleaner Feature：
1
.【Deep removal of carbon deposits】 Deeply remove the highly sticky carbon deposits on the intake manifold, intake & exhaust valves. （Solve the problems of unstable idling, insufficient fuel combustion, and reduced air-fuel ratio.)
2.【External air source】 This enables the walnut sand grit to strike the carbon deposits more powerfully and efficiently.
3.【Built-in dust filter】 It can separate the recovered walnut sand grit from carbon deposits for recycling.
4.【Integrated design】 The walnut sand grit can be sprayed and recovered simultaneously.
5.【3 year warranty】 For damage caused by non-human factors, we promise to resend parts for free
What is carbon deposition?
There are some hydrocarbon olefin residues attached to the engine intake, cylinder when fuel burn in engine not completely. It residues change into hard black shell in high temperature condition , that is called carbon deposition.
Why need clean carbon deposition?
Carbon deposition will decrease air-fuel ratio, cut down engine output power, increase fuel consumption, engine drastic shake on idle status...all the things will hurt the engine deeply. So normally we should clean carbon deposition after every 40000-50000 kilometer trip.
What is walnut powder(sand)?
Walnut sand is a pure natural polish material, its hardness was lower than metal but higher than carbon deposition, it will clean intake pipe and back side of intake valve thoroughly but no damage. A large amount of  pores on surface of  walnut sand which provide super adsorption capacity, non-toxic and corrosion preventive.
It was hardly dissolved in acid, alkali and water. Crash walnut shell into powder, after a vigorous selection process then we get walnut sand. It shows high performance in the three areas: hardness, anti-pressure, wear-resisting.
How to use it?
1.Open head cover of HTS558 and pour into walnut powder (need 2- 4KG ), press dust guard on walnut powder then close cover.
2.Join spray gun muzzle and recycle hose together. (there is a hole on recycle hose)
3.Remove intake manifold of engine, plug spray gun into intake, turn crankshaft to close intake valve. Then connect high pressure air pump((not include)) to HTS558.
4.Connect AC power, start clean. The process should last 1-3 minutes .(depending on carbon deposition circumstances)
5.Close HTS558, check the cleaning result. Normally,  walnut powder can be reuse 5-10 times.(depending on carbon deposition circumstances)
Recommend Reason :
1 Air pump pressure should more than 0.7Mpa (7bar/102PSI)
2 Walnut powder diameter should between 0.4-0.8mm, amount in 2-4KG(4-9LB)
3  Cleaning time between 1-3 minutes
Bullet point:
HTS558 is a special machine for engine Intake pipe and intake valve back side clean.
Close the intake valve, then spray walnut powder into the engine intake via air pump(not included), meanwhile HTS558 will recycle walnut powder by vacuum.
This is a closed loop.  Walnut powder will impact carbon deposition on the inner wall of the intake pipe. After thousands of impact,  carbon deposition will be clear thoroughly
Chemical cleaning agents will corrode the pipe and shorten the lifetime of the engine.
Walnut powder is pure natural polish material. It shows high performance in  hardness, anti-pressure and wear-resisting.
Walnut powder hardness was lower than metal but higher than carbon deposition. Take these advantages,
HTS558 will clean clean intake pipe and back side of intake valve thoroughly but no damage
High-precision engine systems are sensitive to foreign matter in the intake pipe, such as the valvetrain system.
That is why we need HTS558 to clean  carbon deposition in the intake pipe. Engine should be closed before clean,
then turn the crankshaft to close the intake valve. HTS558 clean one intake pipe each time,
6 cylinder engine should cleaned 6 times one by one(and so on)
HTS558 is special for intake pipe and intake valve back side clean only,
If you want to clean the carbon deposition on the injector/throttle valve/cylinder, please choose CT150, CT200 or  C100.
Walnut powder not include in package, please get it in local market;
High pressure air pump is requirement(not include in package);
Walnut powder residue in the intake pipe will go to ashes in high temperature after engine start.
Getting HTS558 immediately, start your new business
Package include:
1x HTS558 unit
2x Spray gun
1x Goggles
1x Recycle hose
1x Recycle hose and spray gun connector
I wish you a happy shopping, we have perfect after-sales service. If you have any questions about the product, please contact me (5 star rating is very important to me)