TP Tools® USA 1536 Champion Skat Blast Abrasive Sandblasting Cabinet, USA

Description

SUPPORT AMERICAN WORKERS!
BUY AMERICAN-MADE PRODUCTS
!
Welcome to TP Tools
TP Tools, Canfield, OH
- Quality Restoration Tools & Equipment specializing in MADE IN USA Skat Blast Abrasive Sandblast Blasting Cabinets - everything for your restoration. Fast, INSTANT SHIPPING (Same Day - 48 Hours) - friendly service - that's a promise.
TP Tools® USA 1536 Champion Skat Blast Abrasive Sandblasting Cabinet, USA
With dust collector, gun. and abrasive. Made in USA!
SUPPORT AMERICAN WORKERS!
BUY AMERICAN-MADE PRODUCTS
!
Compare ... Skat Blast is the BEST BUY,
MADE IN USA
for over 40 Years!
How Skat Blast Cabinets work:
Skat Blast Cabinets are always ready. Leave the cabinet hooked up to your air supply, so it is ready for operation at a moment's notice (no air or abrasive is used until you need it).
Easy to use!
Simply add abrasive to Skat Blast Cabinet by pouring it through side or top-load door, depending on model. Each time power gun is activated, rust, paint, and corrosion are removed
FAST
,
leaving a beautiful satin finish. Abrasive drops to funnel bottom where it automatically recycles into pickup tube and up to power gun. Vacuum system (included with most models) or Dust Collector provides excellent visibility within the cabinet. Cabinet includes full instructions and hookup charts.
Skat Blast Cabinets remove rust, paint, and scale FAST!
That's because our made-in-USA operating system consists of
a "high velocity", dual pickup tube with controlled openings to provide more power and eliminate "surging" during operation. You get a smooth, even flow of abrasive to the gun at all times. Our USA-made 35 Series Power Gun has larger, direct air passages for increased air volume and better suction and blast. Skat Blast Gun power head is manufactured from Zamac, a harder material than aluminum for longer life; and has a cased-hardened insert for better fit against back side of nozzle. Clean fuel pumps, manifolds, air cleaners, wheels, carburetors, interior and under-the-hood parts, hinges, nuts, bolts, screws, springs, A-frames, control arms, oil pans, valve covers, intakes, pistons, valves, fenders - the list is endless! Can be used for heavy rust and scale
or
for delicate jobs, such as etching glass, redwood signs, or special applications.
Superior Performance!
From its no-surge pickup tube system to its high-velocity 35 Series Power Gun, funnel angle, door seal, even how the lens and gloves are held in place (molded holders don't leak), Skat Blast provides a well-built, trouble-free, simply stated, better cabinet! Over 40 years experience manufacturing cabinets in the USA!
Skat Blast Cabinets: built to last, FULLY ASSEMBLED, and ready for hookup to your compressor.
Beware of the word "kit" or "import". What you usually get is a knock-down unit: steel panels, rivets, nuts, bolts, hinges, caulking, and you literally build the unit yourself! (Imports often use a converted blow gun as a blasting gun and other components which aren't nearly as efficient.) A Skat Blast Cabinet is a better investment. Preferred by restoration shops, home restorers, and weekend warriors, a Skat Blast Cabinet is sure to be your favorite too. Hobbyists all over the US tell us they don't know how they managed without one!
(People use the terms sandblast cabinets, sandblasters, and sandblasting cabinets when referring to these machines. However, we do not recommend the use of silica or any type of sand in our abrasive blaster cabinets.)
TP Tools and Skat Blast
* Dependable, Affordable * Parts, Accessories In Stock! * FREE Technical Help *
*
Fast, Friendly Service * Live Operators * No Voice Mail! *
Made in America Skat Blast Cabinets - Start to Finish
https://www.youtube.com/embed/Bcb-xm1cIAk?rel=0
TP Tools How to Sand Blast Movie
https://www.youtube.com/embed/R5zgaxReVVQ?rel=0
Made in USA - FULLY ASSEMBLED!
Extra-High 58"W, 34"D, 36"H Work Area
This welded commercial-grade blast cabinet is designed for HEAVY USE!
If you're serious about abrasive blasting, the 1536 is just what you need!
Model 1536 features:
strong 11-14 gauge steel construction and heavy angle-iron door framework, metal work screen that holds up to 300 lb objects, 180-DC HEPA Dust Collector for improved visibility, Tungsten Carbide Nozzle for increased production and longer life over ceramic type, and longer 32" Super-Pro Gloves to bring objects within easy reach.
Easy to use:
just insert part through either side-loading door and press foot pedal. C-35-C Foot-Pedal-Operated Power Gun with large air and abrasive passages removes rust, paint, and scale to bare metal
FAST!
Abrasive continually recycles from bottom hopper onto workpiece, so you don't have to stop to reload.
Action photo in gallery (above) shown with optional Hi-Pro High-Volume Power Head.
HUGE 36" rear inside height lets you blast door skins, fenders, tires (on rims), motorcycle frames, panels, and more
with ease!
1536 Skat Blast Cabinet Includes:
Powerful 180-DC HEPA Dust Collector to remove dust within cabinet as you blast
C-35-C Foot-Pedal-Operated Power Gun with Tungsten Carbide Nozzle (outlasts 30 ceramic nozzles)
7 ft air hose
Tempered glass lens, 12" x 45" x 3/16" with peel-off inner lens protector
Molded glove and lens trim - prevents leaks
32"L Super-Pro Cabinet Gloves (provide 10x the life of standard cabinet gloves)
50 lbs fast-cutting Skat Magic Abrasive
Automatic abrasive recycling system
Two full-size 11 gauge steel side-loading doors with welded angle-iron framework
Strong 11-14 gauge USA steel construction
Expanded metal screen holds objects up to 300 lbs
Two adjustable 90 watt floodlights, 115 volts with on/off switch
Quick-change trap door for fast abrasive changes
Replacement parts IN STOCK!
1536 SPECIFICATIONS: Overall size
- 61-1/2"w, 35"d, 73-1/4"h.
Work area
- 58"w, 34"d, 36"h. Two 11 gauge steel doors with welded angle-iron framework, 14 ga steel body. Requires 10-15 cfm @ 80 psi. 125 psi max.
Fully Assembled
. Crate size: 68"w, 42"d, 76"h. Ship wt: 775 lbs.
Made in USA!
90-Day Trial, 5-Year Limited Warranty
- Try our cabinet in your shop for 90 days. If you are not 100% satisfied, return the unit for a full refund or credit, less freight charges. We have sold thousands of units on this basis and believe that once you try our abrasive blast cabinet, you will
LOVE IT!
Cabinet and power gun carry a full 5-year warranty. Wear items such as nozzles, air jets, lens, gun suction head, hoses, gloves, etc., are not guaranteed. Dust Collector motor is guaranteed for 1 year from date of purchase.
180-DC SPECIFICATIONS:
Powerful 1/3HP, 115 volt, 6 amp, 3450 rpm motor pulls 300-350 cfm. Continuous duty. Greatly improves visibility over smaller vacuums due to larger filtering area and 5" diameter hose. 16" wide, 15" deep, 56" high.
THIS ITEM SHIPS TRUCK MOTOR FREIGHT - US-48 STATES
See U.S. Zone Map below to determine your Truck Motor Freight Shipping Zone.
TRUCK SHIPPING ZONE 1 - 0 Truck Motor Freight Shipping Charge
TRUCK SHIPPING ZONE 2 - 0 Truck Motor Freight Shipping Charge
TRUCK SHIPPING ZONE 3 - 0 Truck Motor Freight Shipping Charge
Due to this eBay item being a Truck Motor Freight item, the above shipping charge cannot be combined to save shipping.
This charge is per item.
SHIPPING INFORMATION -
TRUCK MOTOR FREIGHT ITEMS
TP Tools Ships to US-48 STATES ONLY through our eBay Store.
WE DO NOT EXPORT.
TRUCK MOTOR FREIGHT SHIPPING -
Items with the Truck Freight symbol which are too large to ship UPS/USPS are shipped by Truck Motor Freight
US-48 States only
to your home or business. Due to the size of these shipments, these items have an individual Freight Shipping Charge that is the buyer's responsibility.
HOW TO DETERMINE YOUR TRUCK MOTOR FREIGHT SHIPPING CHARGE -
Locate your state in the U.S. Zone Map right to determine your Truck Motor Freight Shipping Zone. Match your Shipping Zone in the above listing for your Truck Motor Freight Shipping Charge.
COMBINED SHIPPING -
Sorry, we cannot combine shipping on this eBay item due to it being heavy or oversize.
The Truck Motor Freight Shipping Charge shown above is per item.
TP TOOLS SHIPS QUICK!
Please provide a
daytime phone number
and your
Paypal Confirmed Address
for Motor Freight shipping so your order will not be delayed.
TRUCK MOTOR FREIGHT ORDERS
normally leave our premises within 24-48 hours. Freight Lines deliver to tailgate of their truck - no unloading (see below).
NOTE - Freight costs are based on shipping to "Direct Points - No Interlines", meaning shipment reaches you by the
same freight line
. If necessary to interline (transfer from one freight line to another) or deliver to remote or high-cost delivery areas, we will call or email you prior to shipping to advise you of extra cost. If this is the case, you may want to pick up your shipment at a nearby freight terminal to save extra cost, speed delivery, and minimize the possibility of damage.
TRUCK FREIGHT DELIVERY
- Allow 3-10 business days from the date shipped. Actual time will depend on delivering carrier. Some residential areas will not accommodate semi trailers, and it will be necessary that you pick up the freight at the local terminal or have the freight delivered to a business. You are responsible for both incoming and outgoing freight, should your shipment be refused.
TRUCK FREIGHT UNLOADING - Motor Freight Carriers are not responsible for unloading.
They will move the freight only to the end of the truck (Tailgate Delivery). It is the customer's responsibility to take the freight off the truck and into his/her garage or shop. The truck driver is not obligated to assist in unloading. Please have adequate equipment and help to unload your shipment at the time of delivery, as truck lines are unable to wait. "Unload or Liftgate Service" is available at extra cost (see below).
UNLOAD or LIFTGATE SERVICE
- Unload or Liftgate Service is a service offered on most items requiring shipment by Truck Motor Freight. This is an extra cost option of -0. (Call or email us if you would like to take advantage of this service.) The freight carrier will do one of the following:
The equipment will be placed on the liftgate of the truck and lowered to the ground. The driver will then take the equipment off the liftgate.
If no liftgate is available on the delivering truck, the freight carrier may lower the equipment to the ground.
Once off the liftgate or truck, the customer assumes responsibility for any further placement or delivery of the equipment. Unload or Liftgate Service is a per-shipment charge. It applies to orders being shipped from one location. If necessary to ship from two locations, then two Unload or Liftgate Service charges would apply.
WE CANNOT SHIP TO - a P.O. Box, APO/FPO address, Freight Forwarder, Shipping Company/Station, or any other address outside of the US-48 States through our eBay Store.
WE SHIP ONLY TO -
U.S. PayPal Confirmed Addresses. (If not confirmed, payment will be refunded.)
MOST ORDERS ARE SHIPPED WITHIN 24-48 HOURS
of payment. Due to the current pandemic - we are experiencing longer supplier and shipper lead times than normal. These factors may delay your order slightly. TP TOOLS is doing everything possible to process your order quickly and in a timely manner. We thank you for understanding. Occasionally an item can be out of stock or oversold, as we also sell through our web site and retail store, and by phone and mail. If the item is out of stock or oversold, we will cancel the out of stock item and refund your PayPal account, if applicable. You will be notified by email.
PAYMENT INFORMATION - U.S. PayPal Payments Only
U.S. PayPal PAYMENTS ONLY -
TP Tools eBay Store accepts secure payments by PayPal from U.S.-registered PayPal accounts only. PayPal e-Checks are held until cleared. We only ship to U.S. PayPal Confirmed Addresses.
PAYMENT BY 7 DAYS -
Payment must be received within 7 days after purchase. If payment is not made within 7 days, we will follow eBay procedures by filing an Unpaid Item Dispute.
SALES TAX - Due to rapid changing tax laws, your order may be subject to state sales tax. Please check with eBay for more information or which states sales tax will be collected
.
ORDER CONFIRMATION -
You will receive confirmation by email after your purchase.
TP TOOLS GIFT CERTIFICATES -
are not redeemable through our eBay Store.
OFFERS -
Sorry, we DO NOT accept offers.
CUSTOMER SERVICE, RETURNS & MISC. INFO
QUESTIONS
- Due to our products being technical in nature, we encourage you to call between 9am-6pm ET Monday-Friday and speak to a product specialist for more information about product(s) of interest. Also, call if you have any questions regarding shipping, unloading, or payment.
No Voice Mail - Live Operators!
CANADA, AK, HI, PR, and VI
- We do not ship or sell to these areas through our eBay Store.
RETURNS
- If you are not completely satisfied with any item, simply return it within 30 days. Please be sure item is in new, resalable condition in its
original packaging
and is returned to Tip Plus Corp prepaid. Paints, primers, activators, body fillers, abrasives, respirators, gloves, nozzles, and wear items are nonreturnable. Customer is responsible for shipping or freight costs both ways. Before returning item, please contact TP Tools Customer Service 9am-6pm ET Monday-Friday.
C.O.D. PACKAGES
- Sorry, we do not accept C.O.D. Packages.
PRIVACY
- We respect your privacy. TP Tools does not sell, rent, or lend its customers information. Your privacy and security of information is kept in strict confidence.
OOPS!
- We make every effort to produce an error-free eBay listing. However, errors sometimes occur; and we are not responsible for typographical errors or misinterpretations of our eBay ad copy.
PRODUCT CHANGES
- Due to a global market and manufacturer's changes, a product's country of origin, description, specs, photos, pricing, or shipping charges may change without notice. We reserve the right to correct our eBay listings as needed.
RIGHT TO LIMIT QUANTITIES
- Products offered by TP Tools are not intended for resale or any other purpose. Accordingly, we reserve the right to limit quantities.
VISIT TP TOOLS CANFIELD, OH RETAIL STORE
Store Hours:
Monday-Friday 8:30am - 6:00pm ET
Saturday 8:30am - 3:30pm ET
TP Tools is located in Northeast Ohio, midway between Pittsburgh, PA and Cleveland, OH, just minutes off the Ohio/PA Turnpike. We are 1 mile west of the center of Canfield, on U.S. Route 224 at the corner of Rt. 446. If using Map Quest or similar map program for directions, use 7075 State Route 446, Canfield, OH 44406-9432.
TEETER-TOTTER UNLOADING
UNLOADING A SKAT BLAST CABINET
is fairly easy and can usually be handled by two people. (You should have two able-bodied helpers on hand.) Skat Blast Cabinets are well packaged and may be laid on their back side (opposite lens and glove openings) at the rear of the truck. Then simply slide cabinet off truck until it is balancing on the edge in a "Teeter-Totter" position. Two people can then carefully lower the cabinet to the ground. (Some larger cabinets require a third helper.)
HINT
- Get 3 or 4 large empty boxes of various sizes. Fold the four lids closed, place each smaller box into the next largest size. Set on ground under cabinet to absorb shock as cabinet is lowered to ground.